Why Paslode Cordless Framing Nailer combustion chamber does not drop?
If the combustion chamber on your Paslode Nail Gun doesn't drop after the tool cycles, the work-contacting element may be bent or dirty. Clean or replace the work-contacting element.
Why is my Paslode Cordless Framing Nailer Nail Gun losing power even though the indicator light is green?
If your Paslode Nail Gun operates erratically or appears to be losing power while the indicator light is green, the fuel cell may be low, so check it. Also, the spark plug wire could be loose, so check it. The filter element might be dirty, causing the tool to overheat; remove the filter element and clean it, using soap and water for stubborn debris.
What to do if Paslode Cordless Framing Nailer fasteners do not drive fully?
If the Paslode Nail Gun operates properly but the fasteners aren't fully driven, there could be a few reasons: * The work-contacting element may require adjustment; try adjusting it. * The fuel cell might be low; check it and replace if needed. * There could be a loss of seal in the combustion chamber. To check, press the work-contacting element against the workpiece for one minute, then pull the trigger. If the fastener still doesn't drive, there's likely a leak that requires professional service.
Why Paslode Cordless Framing Nailer Nail Gun operates, but no fastener is driven?
If your Paslode Nail Gun operates but doesn't drive any fasteners, consider the following: * You might be using the wrong fasteners. Ensure you're using fasteners that meet Paslode specifications. * The follower might not be properly engaged behind the fastener strip. Position the follower behind the fastener strip and engage the strip. * There might be a jammed fastener. Clear the jam.
Why is the indicator light blinking red on my Paslode Cordless Framing Nailer and the fan not running?
If the fan doesn't run and the tool indicator light is blinking red or solid red, the battery may not be charged, so charge it. Alternatively, the battery terminals could be oily, dirty, or corroded; clean them with fine emery cloth.
What to do if Paslode Cordless Framing Nailer Nail Gun work-contacting element does not depress fully?
If the work-contacting element on your Paslode Nail Gun doesn't depress fully and the tool won't operate: * The lockout bracket might be stuck in the lockout position. Check the lockout. If you can't free it, return the tool to an authorized Paslode dealer for service. * The work-contacting element could be bent, or debris buildup in the track might restrict operation. Remove and inspect the lower probe, clean and lubricate the track with Cordless Lubricating oil, and repair or replace the lower probe as needed. Also, ensure the follower is positioned behind the fasteners.
Why my Paslode Cordless Framing Nailer won't cycle but the fan runs and the light is green?
If your Paslode Nail Gun's fan runs and the indicator light is solid green, but the tool won't cycle, consider these potential causes: * The fuel cell might be empty, so replace it. * The spark wire could be out of the spark plug; remove the cap, check the spark lead, insert it into the spark plug, and replace the cover. * The spark plug might be dirty; clean the tool cylinder head and spark plug.
Why Paslode Cordless Framing Nailer fasteners are over or under-driven?
If your Paslode Nail Gun sometimes over-drives and sometimes under-drives fasteners, the work-contacting element might not be adjusted properly for the material you're fastening. Adjust the work-contacting element and readjust as needed when the material's density or thickness changes.
Why Paslode Nail Gun battery does not accept charge?
If the Paslode Nail Gun battery doesn't seem to accept a charge when plugged into the wall mount adapter: * There may be inoperative indicator lights on the charger, or a defective charger. Try the battery in the tool after a full charge cycle. If the tool LED is green, the charger isn't working properly. Replace the charger, or monitor charging time to ensure the battery has adequate time for recharging. It's normal for the battery to feel warm after properly charging. * The battery might be damaged or its cycle life exhausted. Replace the battery.
What to do if Paslode Cordless Framing Nailer operates erratically and loses power?
If your Paslode Nail Gun operates erratically or seems to lose power while the indicator light is green, check the following: * The fuel cell might be low, so check it. * The spark plug wire could be loose, so inspect it. * The filter element might be dirty, causing the tool to overheat. Remove the filter element and clean it, using soap and water for stubborn debris.
Details Paslode's limited warranties for tools, parts, and accessories.
Provides a general description of the Paslode Cordless framer's functionality.
Lists key technical specifications like weight, dimensions, and cycle rate.
Covers combustion, ventilation, temperature, child safety, and initial precautions.
Includes eye/ear protection, tool handling, trigger use, fastener loading, and discharge prevention.
Addresses safe use of the work contacting element and proper fastener driving locations.
Covers hazardous areas, high locations, qualified personnel, storage, and battery disposal.
Details charging procedures, times, important notes, and warnings for the battery.
Lists optional accessories available for the Paslode cordless charging system.
Provides steps for inserting and removing the battery, and cleaning terminals.
Explains the function and color codes of the battery indicator light on the tool.
Explains fuel cell structure, operation, hazards, metering valve function, and handling.
Guides on attaching the metering valve, inserting the fuel cell, and closing the cover.
Covers fuel cell replacement, expiration dates, storage, and flammability dangers.
Illustrates the correct procedure for loading fasteners into the nailer magazine.
Provides guidelines for operating the tool in various outdoor weather conditions.
Advises on managing tool performance and preventing overheating in hot conditions.
Offers recommendations for operating the tool effectively in cold temperatures.
Explains the initial step of pressing the work contacting element against the surface.
Details the function of squeezing the trigger to ignite the combustion chamber.
Guides on adjusting the work-contacting element to control fastener depth.
Introduces an optional accessory for mark-free applications.
Illustrates various construction applications for the Paslode nailer.
Lists fastener sizes, types, and their corresponding construction applications.
Explains different fastener types like smooth shank, ring shank, and galvanized.
Details specific nails driven by the Impulse Cordless Framer, including part numbers.
Lists procedures that can be performed by the user vs. requiring a technician.
Procedure to check fuel cell status and determine if it needs replacement.
Guidance on checking battery charge level and indicator light status.
Step-by-step instructions for safely clearing jammed fasteners from the tool.
Instructions for cleaning and maintaining the tool's air filter for optimal performance.
Recommended steps to perform at the end of each workday for tool care.
Addresses issues related to the battery not charging or the charger overheating.
Diagnoses problems like the fan not running or slow operation based on indicator lights.
Troubleshoots issues preventing the tool from operating or cycling.
Solves problems with fasteners not driving fully, over-driving, or not driving at all.
Addresses issues where the driver blade does not return or the combustion chamber does not drop.
Details Paslode's limited warranties for tools, parts, and accessories.
Provides a general description of the Paslode Cordless framer's functionality.
Lists key technical specifications like weight, dimensions, and cycle rate.
Covers combustion, ventilation, temperature, child safety, and initial precautions.
Includes eye/ear protection, tool handling, trigger use, fastener loading, and discharge prevention.
Addresses safe use of the work contacting element and proper fastener driving locations.
Covers hazardous areas, high locations, qualified personnel, storage, and battery disposal.
Details charging procedures, times, important notes, and warnings for the battery.
Lists optional accessories available for the Paslode cordless charging system.
Provides steps for inserting and removing the battery, and cleaning terminals.
Explains the function and color codes of the battery indicator light on the tool.
Explains fuel cell structure, operation, hazards, metering valve function, and handling.
Guides on attaching the metering valve, inserting the fuel cell, and closing the cover.
Covers fuel cell replacement, expiration dates, storage, and flammability dangers.
Illustrates the correct procedure for loading fasteners into the nailer magazine.
Provides guidelines for operating the tool in various outdoor weather conditions.
Advises on managing tool performance and preventing overheating in hot conditions.
Offers recommendations for operating the tool effectively in cold temperatures.
Explains the initial step of pressing the work contacting element against the surface.
Details the function of squeezing the trigger to ignite the combustion chamber.
Guides on adjusting the work-contacting element to control fastener depth.
Introduces an optional accessory for mark-free applications.
Illustrates various construction applications for the Paslode nailer.
Lists fastener sizes, types, and their corresponding construction applications.
Explains different fastener types like smooth shank, ring shank, and galvanized.
Details specific nails driven by the Impulse Cordless Framer, including part numbers.
Lists procedures that can be performed by the user vs. requiring a technician.
Procedure to check fuel cell status and determine if it needs replacement.
Guidance on checking battery charge level and indicator light status.
Step-by-step instructions for safely clearing jammed fasteners from the tool.
Instructions for cleaning and maintaining the tool's air filter for optimal performance.
Recommended steps to perform at the end of each workday for tool care.
Addresses issues related to the battery not charging or the charger overheating.
Diagnoses problems like the fan not running or slow operation based on indicator lights.
Troubleshoots issues preventing the tool from operating or cycling.
Solves problems with fasteners not driving fully, over-driving, or not driving at all.
Addresses issues where the driver blade does not return or the combustion chamber does not drop.
General| Nail Type | Framing Nails |
|---|---|
| Battery Type | Lithium-Ion |
| Fuel Cell Type | Paslode Fuel Cell |
| Nail Diameter | 0.113 to 0.131 inches |
| Firing Mode | Sequential or Bump |
To Next Page