EasyManua.ls Logo

Paslode T200-F18 - User Manual

Paslode T200-F18
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MODEL T200-F18
MODEL T125-F18
Finish Nailers
IMPORTANT!
DO NOT DESTROY
It is the customer’s responsibility to have all
operators and service personnel read and
understand this manual.
OPERATING MANUAL AND
SCHEMATIC
P
Question and Answer IconNeed help?

Do you have a question about the Paslode T200-F18 and is the answer not in the manual?

Summary

Introduction

Tool Warranty and Limitations

90-Day Limited Warranty

Details the standard 90-day warranty for all parts, excluding wear items.

Extended Limited Warranty

Covers one year for housing/cap castings and six months for magazine parts.

Normal Wearing Parts

Lists parts like bumper, drive blades, and O-rings not covered by warranty.

Tool and Fastener Specifications

Tool Air Fittings

Specifies the required 1/4” N.P.T. male plug and minimum inside diameter for air fittings.

Operating Air Pressure

Recommends 70 to 100 p.s.i. and warns against exceeding this recommended pressure.

Safety Instructions

Pre-Operation Safety Checks

Emphasizes reading the manual, wearing protection, and checking safety features before operation.

Safe Tool Operation Practices

Covers operating on workpiece, avoiding horseplay, and never assuming the tool is empty.

Tool Maintenance and Air Pressure

Addresses keeping the tool clean, using correct parts, and not exceeding air pressure limits.

Instructions for Loading

Parts Legend

Accessories

Safety Glasses

Offers clear and tinted safety glasses with associated part numbers.

Lubricants and Loctite

Lists recommended lubricants like Loctite 242 and oils with their part numbers.

Degreaser Cleaner

Recommends a degreaser cleaner for all Paslode tools with its part number.

Summary

Introduction

Tool Warranty and Limitations

90-Day Limited Warranty

Details the standard 90-day warranty for all parts, excluding wear items.

Extended Limited Warranty

Covers one year for housing/cap castings and six months for magazine parts.

Normal Wearing Parts

Lists parts like bumper, drive blades, and O-rings not covered by warranty.

Tool and Fastener Specifications

Tool Air Fittings

Specifies the required 1/4” N.P.T. male plug and minimum inside diameter for air fittings.

Operating Air Pressure

Recommends 70 to 100 p.s.i. and warns against exceeding this recommended pressure.

Safety Instructions

Pre-Operation Safety Checks

Emphasizes reading the manual, wearing protection, and checking safety features before operation.

Safe Tool Operation Practices

Covers operating on workpiece, avoiding horseplay, and never assuming the tool is empty.

Tool Maintenance and Air Pressure

Addresses keeping the tool clean, using correct parts, and not exceeding air pressure limits.

Instructions for Loading

Parts Legend

Accessories

Safety Glasses

Offers clear and tinted safety glasses with associated part numbers.

Lubricants and Loctite

Lists recommended lubricants like Loctite 242 and oils with their part numbers.

Degreaser Cleaner

Recommends a degreaser cleaner for all Paslode tools with its part number.

Paslode T200-F18 Specifications

General IconGeneral
Magazine Capacity100
Nail Size18 gauge
Tool-Free Depth AdjustmentYes
Tool-Free Jam ReleaseYes
Battery TypeLithium-Ion
Battery VoltageNot applicable (gas-powered)
Operating PressureNot applicable (gas-powered)

Related product manuals