Why doesn't the fan run on my Paslode Nail Gun and the indicator light is red?
If the fan on your Paslode Nail Gun isn't running and the indicator light is blinking or solid red, it could be due to a discharged battery (charge the battery) or oily, dirty, or corroded battery terminals (clean the battery terminals with a soft cloth).
What to do if the work-contacting element on my Paslode Nail Gun won't depress fully?
If the work-contacting element on your Paslode Nail Gun isn't depressing fully and the tool won't operate, it could be because the work-contacting element is bent or there's a build-up of debris in the track restricting operation (remove and inspect the lower probe, clean the track, and repair or replace the lower probe as needed). It could also be that the lockout feature is engaged (add a strip of nails).
Why is the fan on my Paslode IM250A Nail Gun not running or running slow, and the indicator light is solid red?
If the fan on your Paslode Nail Gun isn't running or is running slower than normal, and the tool indicator light is solid red, the battery is likely discharged. You should charge the battery.
What to do if my Paslode Nail Gun charger gets hot, noisy, or smokes?
If your Paslode Nail Gun charger gets hot, makes excessively loud noise, or smokes during the charging cycle, or if the charger cord or wall plug gets hot, discontinue use immediately and unplug it from the power source. Replace the charger and tag or dispose of the old charger to prevent accidental re-use or connection to a power source, as the charger is damaged.
What to do if my Paslode IM250A won't cycle but the fan runs and the light is green?
If your Paslode Nail Gun isn't cycling despite the fan running and a solid green indicator light, the issue could be due to several reasons: the fuel cell might be empty (replace it), the spark wire might be out of the spark plug (remove the cap, check the spark lead, insert it into the spark plug, and replace the cover), or the spark plug could be dirty (clean the tool cylinder head). If no spark is generated, return the tool to an authorized Paslode dealer for service.
Essential safety warnings and precautions for operating the nailer safely.
Detailed guidelines for safe handling, operation, and use of the nailer.
Safety advice for storing the tool, fuel cells, and battery, including disposal.
Step-by-step charging guide, prohibited actions, and charging times.
Information on the fuel cell's construction, operation, and associated hazards.
Diagnosing and resolving common problems related to the battery and charger.
Identifying and fixing issues encountered during regular tool use.
Troubleshooting problems with fastener driving depth, power loss, or erratic operation.
To Next Page
General
