Need help?Do you have a question about the Paslode IM350+ and is the answer not in the manual?
Details on nail diameter (2.8-3.1 mm), length (50-90 mm), and D-head type.
Steps for loading the magazine and the procedure to switch the nailer on or off.
Provides data on battery capacity and charging times for nailer usage.
Explains the '1 CLICK! OFF' and '2 CLICKS! ON' system for controlling the nailer.
Illustrates the step-by-step process for firing the nailer ('BANG!').
Specifies the acceptable operating temperature range for the nailer.
Details on adjusting the magazine angle by 180 degrees.
Visual guide showing how to properly load nails into the nailer's magazine.
Illustrates correct nailing actions that result in 'OK' performance.
Shows common incorrect nailing scenarios marked with 'X'.
References to different parts like P2, P3, P7, P4, P8-9 for compatibility.
Steps demonstrating how to insert or replace parts of the nailer.
Instructions for using the Paslode cleaning kit for maintenance.
Highlights cleaning frequency (30,000 cycles) and necessary kit/filter.
Comprehensive guide covering steps 1 through 10 for cleaning the nailer.
Detailed steps (11-16) for cleaning the internal parts of the nailer.
Steps (17-22) for reassembling the nailer after maintenance.
Explains the 'Resting position' in multiple languages.
A dedicated section for users to record personal notes and observations.
Details on nail diameter (2.8-3.1 mm), length (50-90 mm), and D-head type.
Steps for loading the magazine and the procedure to switch the nailer on or off.
Provides data on battery capacity and charging times for nailer usage.
Explains the '1 CLICK! OFF' and '2 CLICKS! ON' system for controlling the nailer.
Illustrates the step-by-step process for firing the nailer ('BANG!').
Specifies the acceptable operating temperature range for the nailer.
Details on adjusting the magazine angle by 180 degrees.
Visual guide showing how to properly load nails into the nailer's magazine.
Illustrates correct nailing actions that result in 'OK' performance.
Shows common incorrect nailing scenarios marked with 'X'.
References to different parts like P2, P3, P7, P4, P8-9 for compatibility.
Steps demonstrating how to insert or replace parts of the nailer.
Instructions for using the Paslode cleaning kit for maintenance.
Highlights cleaning frequency (30,000 cycles) and necessary kit/filter.
Comprehensive guide covering steps 1 through 10 for cleaning the nailer.
Detailed steps (11-16) for cleaning the internal parts of the nailer.
Steps (17-22) for reassembling the nailer after maintenance.
Explains the 'Resting position' in multiple languages.
A dedicated section for users to record personal notes and observations.
General| Fuel Type | Gas |
|---|---|
| Magazine Capacity | 55 Nails |
| Weight | 3.3 kg |
| Battery Type | Lithium-Ion |
| Power Source | Battery and Fuel Cell |
| Nail Type | Framing Nails |
| Type | Cordless Framing Nailer |
| Nail Length Range | 51mm to 90mm |
| Fuel Cell Life | Approx. 1, 250 shots |
| Firing Mode | Sequential or Bump Fire |
To Next Page
