To Next PageTo Next Page
Need help?Do you have a question about the Paslode IM65 and is the answer not in the manual?
Instructions for loading fasteners into the tool magazine for operation.
Specific instructions for IM65 F16, IM65A F16, and IM50 F18 models.
Procedure for charging the tool battery, showing charge time and capacity.
Essential safety gear and initial tool firing actions.
Step-by-step guide for performing the nailing action with the tool.
Visual examples of tool operation and indicator sequences, including error states.
Instructions for cleaning and maintaining the tool's magazine and air system.
Steps for lubricating the Paslode tool using a maintenance spray.
Guidance on storing the tool to ensure its longevity and proper function.
Instructions for loading fasteners into the tool magazine for operation.
Specific instructions for IM65 F16, IM65A F16, and IM50 F18 models.
Procedure for charging the tool battery, showing charge time and capacity.
Essential safety gear and initial tool firing actions.
Step-by-step guide for performing the nailing action with the tool.
Visual examples of tool operation and indicator sequences, including error states.
Instructions for cleaning and maintaining the tool's magazine and air system.
Steps for lubricating the Paslode tool using a maintenance spray.
Guidance on storing the tool to ensure its longevity and proper function.
General| Weight | 2.1 kg |
|---|---|
| Battery Type | Lithium-ion |
| Fastener Diameter | 1.6 mm |
| Firing Mode | Sequential or Bump Fire |
| Power Source | Gas and Battery |
| Fuel Cell Capacity | 1000 shots per cell |
| Operating Pressure | Not applicable |
| Magazine Capacity | 100 nails |
