Need help?Do you have a question about the Paslode IM360CI and is the answer not in the manual?
Tool's operating temperature range, nail capacity, and production rates.
Recommended safety gear for operating the Paslode IM360Ci nailer.
Illustration of the tool's successful nail firing and operation.
Examples of nail firing failures and potential issues.
Step-by-step guide for cleaning the nail magazine and internal fan.
Comprehensive procedure for disassembling and cleaning the tool's internal parts.
Instructions for replacing parts and reassembling the tool after maintenance.
Guide on how to perform a system reset on the Paslode IM360Ci.
Key technical data and system features of the tool.
Details for the manufacturer and production information.
Tool's operating temperature range, nail capacity, and production rates.
Recommended safety gear for operating the Paslode IM360Ci nailer.
Illustration of the tool's successful nail firing and operation.
Examples of nail firing failures and potential issues.
Step-by-step guide for cleaning the nail magazine and internal fan.
Comprehensive procedure for disassembling and cleaning the tool's internal parts.
Instructions for replacing parts and reassembling the tool after maintenance.
Guide on how to perform a system reset on the Paslode IM360Ci.
Key technical data and system features of the tool.
Details for the manufacturer and production information.
General| Type | Framing Nailer |
|---|---|
| Battery Voltage | 7.4V |
| Tool Width | 127mm |
| Power Source | Battery and Fuel Cell |
| Nail Length Range | 50 - 90 mm |
| Nail Diameter | 2.8mm - 3.1mm |
| Fuel Cell Life | Approximately 1250 shots |
| Operating Temperature Range | -15°C to 49°C |
| Fastener Collation | Paper |
| Fuel Cell Type | Paslode fuel cell |
| Weight (lbs) | 7.3 lbs |
To Next Page