MODEL NO. T200-F18 (Part# 500959) T125-F18 (Part#501161)
HEIGHT 9-3/4"
WIDTH 2-3/8"
LENGTH 9-3/4"
WEIGHT 2.1lbs.
NAIL LENGTH 5/8" - 2" 5/8” - 1-1/4”
SHANK DIAMETER 18 gauge
OPERATING PRESSURE 70 to 100 p.s.i.
TOOL AIR FITTINGS:
This tool uses a 1/4” N.P.T. male plug. The inside diameter should be .28” (7mm)
or larger. The fitting must be capable of discharging tool air pressure when
disconnected from the air supply.
OPERATING AIR PRESSURE:
70 to100 p.s.i. Select the operating air pressure within this range for best tool
performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
TOOL AND FASTENER SPECIFICATIONS
3
7-1/2”
2-3/8”
9-2/3”
1.75 lbs.
To Next Page
Loading...
