DS350GM - BOOM CONTROL EXTENSION RT 865BXL 5
031-300-190-047 Rev0 02/17/1999
1.2 GETTING STARTED
This section explains how to handle a problem that may arise with the PAT DS 350 Modular LMI boom
control extension. The procedures are given in flowchart format for the following sections. Start with the
general flowchart below which will guide you to one of the detailed flowcharts shown in Sections 1.1 to 1.7.
The drawings that are referenced in these sections can be found in Section 2.1 to 2.13.
Start
Boom length %
problem
No tele function at all in
automode
Boom out of sequence
in Auto mode
E61
Error in the boom
control extension
Start with section 1.3 Start with section 1.4 Start with section 1.6
Start with section 1.7
E83
Outer mid/ fly section is
not fully retracted or
center mid section is
not fully extended.
Start with section 1.5
To Next Page
Loading...
