3.How to Use It
❶Turn on/Turn off
Turn on:5.Press the power button one time to turn on, the green
light will on and with two beep.
Turn off:Press and hold the power button 1.5S, it will be tuurned off
and with one beep.
Standby:will enter Standby mode after 1 minute of inactivity
This bark stopper has two different function mode:With static
stimulation function and without static stimulation function. And
you could switch mode via press M button.
①With static stimulation function:with beep, vibration and static
stimulation function,and the corresponding red stimulation icon
is displayed.(3B)
3A 3B
❷Two different function mode switching
M M
7
To Next Page
