❸ Testing Light Instructions:
A. Press the power button to turn on
B. Hold the Test Light Contacts to the contact Points.
C.Make the collar at with static stimulation function mode.
D. Please send a similar sound of "Wang, Wang"to sensors(imitating
dog barking). Since the frequency of human voice is different from
that of dogs, please test more time.
Important note: The correct wearing and positioning of the bark stop
collar is important for effective operation.
To ensure proper wearing, please follow the steps below:
5.Wearing Method:
❶Make sure the bark stop collar is closed
❷Keep your dog in a comfortable standing position.
(As shown below A)
❸Place the bark stop collar on the dog's neck, place the bark stop
collar control ring in the center, and the “on/off” switch on the
operating surface of the collar faces upward.(As shown below B)
❹Check the tightness of the bark stop collar by inserting a nger
between the dog's collar and the back neck. The proper position
should be comfortable rather than tightened.(As shown below C)
11
To Next Page
