PRG
Select Value
PRG
PRG
PRG
PRG
Enter Value
PRG
Remote
connection
PRG
PRG
PRG
0
data F
0
SET FUN
PRG
Enter Value
PRG
PRG
trasN-
End-oh
0
rECEIV
End-oh
ErasE
End-oh
PRG
0
IP-Ad1
PRG
000
123
PRG
Enter Value
SET FUN
IP-Ad4
0
PRG
…
PRGPRG
…
0
SnEt 1
PRG
000
123
PRG
Enter Value
SET FUN
SnEt 4
0
PRG
…
PRGPRG
…
AddrEs
0
SET FUN
PRG
Enter Value
PRG
AddrEs COM1 SERIAL COMMUNICATION ADDRESS
Configuration of the address used in the transmission protocols and
in the MODBUS protocol.
Value from 000 to 99.
Default:01
Pr-Add PROGRAMMING OF THE PROFIBUS ADDRESS
Configuration of the address used in the PROFIBUS protocol.
Values: from 0 to 126
Default: 01
dC-Add PROGRAMMING OF THE DEVICENET ADDRESS
Programming of the address used in DEVICENET protocol.
Value: from 0 to 63
Default:01
dELay DELAYED RESPONSE OF THE SLAVE AND MODBUS RTU COM1
PROTOCOLS
Indicative delay of the response string used in the SLAVE protocol.
(expressed in 1/100 sec., max 1 sec).
This value is expressed in milliseconds and represents the delay with
which the instrument sends the response to the request received from
the master.
Value: from 0 to 999 msec
Default: 000
To Next Page
Loading...