Heating & Cooling
INSTALLATION
FLEXIBILITY:
CASING:
COMBUSTION
SYSTEM:
3-PASS
PRIMARY
HEAT
EXCHANGERS:
FLOW-THROUGH
SECONDARY
HEAT
EXCHANGERS:
LIMITED
WARRANTY:
MONOPORT
INSHOT
_ BURNERS:
®
/
FEATURES
The 4-way multipoise design allows
a model PG9MAA to be installed
in an upflow, downflow, or horizon-
tal orientation. Atl sizes of the
PG9MAA may be installed in direct
vent (2-pipe) applications. All sizes
except the t40 size may be
installed in non-direct vent (1-pipe)
applications. The 140 size also
has an elevation limitation of 7,000
ft. See "Combustion Air and Vent
Pipe" table for more information.
The casing also has the required
openings for left- or right-side
connection of gas, electric, drain,
and vent connections.
INTEGRATED
CONTROL
CENTER:
COMBUSTION
Enclosed burner assembly isolates
operating noise without the expense
of sound deadening devices.
This design accelerates heat trans-
fer and extracts heat that conven-
tiona! heat exchangers waste up
the flue. The primary heat ex-
changer is made of aluminized
steel for corrosion resistance.
AIR AND
VENTILATION:
Each cell is laminated with our pa-
tented polypropylene for greater
corrosion resistance to help extend
the life of the furnace for years of
dependable performance. The heat
exchanger is positioned in the fur-
nace to extract additional heat from
the combustion products regard-
less of furnace orientation.
CERTIFICATIONS:
The PG9MAA is backed by a Life-
time Warranty on the heat ex-
changers in direct vent application
(2O-year in non-direct vent applica-
tions) and a 5-year Warranty on al!
other parts.
Produce precise air-to-gas mixture
which gives a clean burn. The large
monoport on the inshot or injec-
QUALITY
REGISTRATION:
tion-type burners seldom, if ever,
needs cleaning.
The printed-circuit board has con-
venient terminals which permit
quick-connection of a thermostat, air
conditioning control circuits, a humid-
ifier, or an air cleaner. The control
has a built-in status indicator and
self-test feature. A self-test feature
allows for a complete check of the
major components in about 60 sec-
onds. The control also features an
adjustable blower off delay.
The PG9MAA advanced design
attows Schedute 40 PVC,
Schedule 40 CPVC pipe and fit-
tings, PVC-DWV, SDR-21 PVC,
SDR-26 PVC (not approved in
Canada), ABS-DWV, or ABS-
F628 Schedule 40 pipe to bring
air into the furnace for combus-
tion and to be used for venting
combustion products outside the
structure. The vent pipe can ter-
minate through a sidewall or
through the roof.
The PG9MAA units are CSA (for-
medy A.G.A. and C.G.A.) design
certified for use with natural and pro-
pane gases, as welt as GAMA
efficiency rating certified. The fur-
nace is factory-shipped for use with
natural gas. A CSA (formerly A.G.A.
and C.G.A.) listed gas conversion kit
is required to convert fumace for use
with propane gas. The model
PG9MAA meets Catifomia Air Qual-
ity Management District emission
requirements.
The quality systems for this product
have been registered by UL to
ISO 900I Standards.
m
O
I,L!
or)
O
SS-PG9M-05
To Next Page
Need help?
General
