EasyManua.ls Logo

Payne PG9MAA - User Manual

Payne PG9MAA
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Condensing
Gas Furnace
NOTE TO INSTALLER:
This manual must be left
with the equipment user.
MODEL PG9MAA
4-Way Multipoise
Fixed-Capacity
Direct/Non-Direct Vent
Condensing Gas Furnace
a
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.
WHAT TO DO IF YOU SMELL GAS:
Do not try to light any appliance.
Do not touch any electrical switch; do not use any
phone in your building.
Immediately call your gas supplier from a
neighbor’s phone. Follow the gas supplier’s
instructions.
If you cannot reach your gas supplier, call the fire
department.
Installation and service must be performed by a
qualified installer, service agency or the gas
supplier.
WARNING: If the information in this manual is
not followed exactly, a fire or explosion may
result causing property damage, personal
injury or loss of life.
USER’S INFORMATION MANUAL FOR THE OPERATION AND
MAINTENANCE OF YOUR NEW GAS-FIRED FURNACE
As an ENERGY STAR® part-
ner, Payne Heating & Cooling
Systems has determined that
this product meets the
ENERGY STAR® guidelines
for energy efficiency.

Other manuals for Payne PG9MAA

Question and Answer IconNeed help?

Do you have a question about the Payne PG9MAA and is the answer not in the manual?

Summary

Welcome and Installation Data

Installation Data

Fields for recording installation details like date, dealer, and location.

Split-System Outdoor Unit

Fields for recording outdoor unit product, model, and serial numbers.

Indoor Coil

Fields for recording indoor coil product, model, and serial numbers.

Furnace Components and Safety

Furnace Components

Detailed list and description of various parts of the furnace unit.

Safety Considerations

Crucial safety information regarding installation, servicing, and potential hazards.

Important Facts and Operations

Important Facts

Key information about direct-vent and non-direct vent applications and safety rules.

Starting Your Furnace

Step-by-step guide on how to safely start the gas furnace using the ignition system.

Steps for Starting Your Furnace

Detailed sequence of actions for initiating furnace operation from the thermostat and gas valve.

Shutdown and Maintenance Procedures

Shutting Down Your Furnace

Procedures for turning off the furnace for service or maintenance.

Performing Routine Maintenance

Instructions for basic maintenance tasks to ensure economical and dependable operation.

Filtering Out Trouble

Guidance on checking, cleaning, and replacing the air filter to maintain airflow.

System Inspection and Winterization

Combustion Area and Vent System

Instructions for inspecting the combustion area and vent pipes for leaks and blockages.

Heading South for the Winter?

Instructions for winterizing the furnace to prevent freeze damage during cold periods.

Dont Forget Your Furnace!

Specific advice for preparing the furnace for winter operation and storage.

Troubleshooting and Diagnostics

A Check-Up Checklist

A list of checks for a trained service specialist to perform annually.

Before You Request a Service Call

Steps to troubleshoot common furnace issues before contacting a service technician.

Model PG9 MAA Diagnostic Chart

A chart detailing fault codes and their corresponding troubleshooting checklists.

Payne PG9MAA Specifications

General IconGeneral
BrandPayne
ModelPG9MAA
CategoryFurnace
LanguageEnglish

Related product manuals