To Next PageTo Next Page
Need help?Do you have a question about the PCB Piezotronics IMI SENSORS 685B0000A10 and is the answer not in the manual?
General| Brand | PCB Piezotronics |
|---|---|
| Model | IMI SENSORS 685B0000A10 |
| Category | Switch |
| Language | English |
Process for returning equipment for factory repair, requiring an RMA number.
Contact details for PCB Piezotronics for general inquiries and repair.
Important safety precautions for product use and when to contact the Sensorline.
Refers to hazards that could damage the instrument.
Indicates tips, recommendations, and important information.
Explains symbols found on the equipment, like high voltage and ground.
Provides address, phone, and fax details for PCB Piezotronics.
Details the manual number and revision level.
Lists key features of the 685B-Series vibration switch.
Specifies the required voltage for the unit.
Indicates the maximum current draw.
Identifies the sensor technology used.
Lists the available vibration measurement ranges.
Defines the frequency bandwidth of the sensor.
Specifies the fixed turn-on delay time.
Defines the adjustable delay for alerts and alarms.
Describes how to select latch or continuous operation.
Details the type and rating of relay outputs.
Specifies the operational temperature limits.
Defines the permissible storage temperature limits.
Indicates the humidity rating.
Provides the physical dimensions of the unit.
Specifies the weight of the device.
Identifies the material used for the enclosure.
Describes the type of electrical connections.
Specifies the allowable wire gauge for terminals.
Details the options for connecting external wiring.
Specifies the size of mounting holes.
Recommends torque for mounting screws.
Explains the function of Power, Alarm, and Alert LEDs.
Describes how setpoints are adjusted.
Details the reset mechanism.
Guidance on mounting the 685B-Series directly to equipment.
Diagram showing dimensions for models with cord grips.
Internal layout showing controls for Triac relay models.
Internal layout showing controls for electromechanical relay models.
Steps for calibrating the switch using a 4-20 mA simulator.
Procedure for testing calibration using the 'Test' button.
How to connect for remote reset functionality.
Instructions for connecting to the raw vibration output signal.
Details of the adapter plate for retrofitting bolt patterns.
Information on the 4-20 mA calibrator for testing and calibration.
Power supply/signal conditioner should only be opened by qualified personnel.
Equipment protection may be impaired if used improperly.
Cables can damage equipment via electrostatic discharge.
Safety measures for handling cables and preventing ESD.
Internal adjustments require an ESD-safe work area.
Identifies the base model series.
Details the different sensor configurations available.
Specifies the available vibration scale factors.
Lists the power supply options.
Describes the types of relays included.
Details enclosure options and approvals.
Specifies the available connection interfaces.
