PCTV Systems Broadway 2T - Setting Up your Broadway 2 T; wired setup - the Ethernet Mode


22
Setting Up your Broadway 2T
YouhavetwopossibilitiestosetuptheBroadway2T:
 wiredsetup–theEthernetMode
Broadway2TisconnectedviaanEthernetcabletotherouterofyour
network(recommendedinitialsetupto getthemostrobustconnection)
 wirelesssetup–theWLANMode
Broadway2Tisconnectedwire
less
lytotherouterofyourlocal network
(thiswayyoucanplaceBroadway2TonthespotwiththebestDVB‐T
receptionwithinyourwirelesslocalnetwork)

Gotothesetupscenariothatsuitsyoubestandfollowtheinstructions.


BroadwayPlacement

YoucanplaceBroadway2Tonaflatsurfaceormountitonthewall.
Ifyoudecidetomountitonthewallusetheincludedmountingkit(includinga
drillingtemplate).

Ifyoudecidetoplaceitonaflatsurface,makesuretoattachtherubberfeetas
shownintheillustrationbelow.
