Wi‐Fi Operaon Instrucons—Waterway Neo 2100 Series Control
41
1.Download and install the app from App Store or
Google Store.
2.Click on Create an Account.
3.Enter your email address, password, confirm
and submit.
4.Click on Configure a Device.
5.Make sure your spa control pack is powered on
and press Next.
6.Go to your phone seng, Wi‐Fi, and connect to
the Waterway Wi‐Fi device temporary network.
7.Go back to the App, press Next.
8.Select your home network from the list (If your
network name is not on the listed, it can be entered
manually).
9.Enter your home network password and press
Connect.
10.Then the device will configure and connect to
your home Wi‐Fi network and the web, press OK.
11.Click on configured Waterway Wi‐Fi device, i.e.
WATERW‐2975.
12.Set the temp, heang, light operaon. To access
the App menu press ON in top le corner.
To Next Page
Loading...
Need help?
General
