CARE AND MAINTENANCE
Storage
Store this Back-Up Camer
a in a cool, dry area and keep it away from direct sunlight, heat, excessive
humidity and dampness.
Cleaning
Do not clean or wipe the Back-Up Camera with solvents or chemical materials. If necessary, remove
dirt or stains using a soft cloth dampened with a mild detergent solution.
Fuse Replacement
1.
Turn the cap on the tip of the power plug counterclockwise (no tools needed).
2. Remove the cap, center pin and fuse.
3. Replace the fuse with a new 1-amp fuse.
4. Replace the center pin and cap. Turn the cap clockwise.
Disposal
The Back-Up Camer
a is designed to provide years of service. The Back-Up Camera
should be recycled or safely disposed of at a local recycling center. Examples of places
that will accept items like this are: county or municipal recycling drop-off centers or scrap
metal dealers.
SPECIFIC
ATIONS
Camer
a
Current consumption (with transmitter)
<160 mA
Pixels
640 x 480
View angle (measured 9.8 ft [3 m] from camera) 110° ± 15°
Transmitter
Frequency 2414 ± 0.3 MHz
RF transmission distance 197 ft (60 m)
Operation/storage temperature 14° to 140°F (-10° to 60°C)
Monitor
LCD display screen size 4.3 in. (109 mm)
Power cord fuse 1A
To Next Page
Loading...