To Next Page
J
Jim LoweJul 30, 2025
What to do if my Peak Performance PKC0CU Battery Charger shows no current reading?
- MMark SandersJul 30, 2025
If your Peak Performance Battery Charger isn't showing a current reading, there are several things to check: * First, ensure the charger is plugged into a working 110/120-volt grounded AC outlet. * Next, unplug the charger and inspect the battery connections, making sure they are secure with the battery terminal or vehicle chassis. * Also, verify that you've selected the appropriate charge rate for the battery type you are charging. * Allow sufficient charging time, consulting the charging time table. * Consider pre-charge activation. * Confirm the battery has at least 4-5 volts. * Check if the battery is sulfated.
General
