Peak Performance PKC0CA

Questions and Answers

C
Christine LewisAug 12, 2025
What to do if the green LED light stays on when my Peak Performance PKC0CA battery isn't fully charged?
- S
  sullivanchristianAug 12, 2025
  If the green LED light stays on even when the battery isn't fully charged on your Peak Performance Battery Charger, it could be due to: * **Low or damaged battery:** Check the battery voltage using a multimeter. If it's too low, consider replacing the battery. * **Poor cable connection:** Ensure the battery cables are properly and tightly connected to the battery terminals.
S
Samantha KhanAug 23, 2025
What does the red LED light on my Peak Performance PKC0CA mean?
- L
  Laurie SloanAug 23, 2025
  If the red LED light is on, it indicates a reverse polarity shutdown. Disconnect the Peak Performance Battery Charger cables and check their polarity. Ensure you connect positive (+) to positive (+) and negative (–) to negative (–). Charging will resume once the cables are correctly connected.
G
Gary BartlettNov 2, 2025
Why is the yellow LED light off on my Peak Performance PKC0CA Battery Charger?
- P
  pgatesNov 2, 2025
  If the yellow LED light is off when everything is connected, several issues could be the cause: * **Loose charging cable connections:** Unplug the Peak Performance Battery Charger and ensure the battery connections are secure to the battery terminal or vehicle chassis. * **No AC power:** Verify the charger is plugged into a working 110/120-volt AC grounded outlet. * **Low battery voltage:** If the battery voltage is below 4.5 volts, you may need to replace the battery. * **Overheating:** Clean any blocked ventilation openings, remove obstructions, and move the charger to a cooler, ventilated area. Charging will resume automatically when the temperature returns to normal. * **Short circuit:** Disconnect the charger cables and inspect them and the battery for shorts. Charging will...