To Next PageTo Next Page
Need help?Do you have a question about the Peak Performance PKC0CT and is the answer not in the manual?
General| Amperage | 0.8 Amp |
|---|---|
| Battery Type | Lead-Acid (AGM, GEL, WET) |
| Input Voltage | 120V AC |
| Output Voltage | 6V/12V DC |
| Output Current | 0.8A |
| Charging Port | Clamps, Ring Terminals |
| LED Indicators | Yes |
Essential safety instructions for operating the battery charger and preventing hazards.
Warnings about handling batteries that vent explosive gases and potential ignition sources.
Provides immediate steps for skin or eye contact with battery acid.
Details the components and indicators on the charger's control panel for user understanding.
Explains the function of each button and indicator on the control panel.
Guidance on choosing the appropriate charging rate based on battery capacity and type.
Explains the process for batteries that require initial activation before charging can begin.
Step-by-step instructions for charging a battery while it remains in the vehicle.
Step-by-step instructions for charging a battery that has been removed from the vehicle.
Instructions for cleaning the battery charger and its clamps to ensure proper function and longevity.
Guidelines for checking and refilling battery cells with distilled water, with safety precautions.
Recommendations for storing the charger and instructions for proper end-of-life disposal.
Explains error codes displayed by the charger and their corresponding solutions for diagnosis.
Provides instructions on how to get the product serviced or repaired under its warranty terms.
