B
buckreginaAug 11, 2025
What to do if my Peak PKC0CT shows no current reading?
- DDr. Matthew SmithAug 12, 2025
If your Peak Battery Charger shows no current reading, ensure it's plugged into a working 110/120-volt grounded AC outlet. Also, check the battery connections to make sure they are properly connected to the battery terminal or vehicle chassis. Verify that you've selected the correct charge rate for the battery and allowed sufficient charging time. Make sure your battery has at least 4-5 volts and is not sulfated. Consider using the PRE-CHARGE ACTIVATION feature.