2
To avoid electric shock or personal injury, please operate this
meter in strict accordance with the Operation Manual.
This meter can only be installed and operated by qualified
specialists in accordance with the safety precautions and regulations
and the required technical specifications. At the same time, the use
of this meter requires stringent compliance with all laws and safety
regulations for specific applications. Bear in mind that some parts
of electrical equipment may carry hazardous voltages when the
equipment is in operation. Ignorance of any warnings can result in
serious personal injuries and damage to the equipment.
"Qualified person" refers to the one who is familiar with the
meter's configuration, installation, startup and operation and has the
required qualifications to implement the aforesaid work.
1.2 Safety information
Warning:
Do not attempt to input the voltage of more than 30V between
any two input terminals.
The meter is prohibited from being used in the vicinity of any
explosive gas, vapor or dust.
Don't attempt a measurement when the battery cover is left open.
Do not attempt a measurement in any of abnormal conditions,
including the circumstances when the meter is damaged or the
metal parts of the meter or measurement lines are exposed.
Do not mount replacement parts on the meter or modify the meter.
Return the meter to local dealer for repair when it is damaged.
Warning:
Please remove the batteries and put them away when they are left
idle or preserved.
To Next Page
Loading...