3
Do not attempt cleaning with abrasives or solvents. Instead,
you may use a mild detergent or a damp cloth.
Confirm that the testing terminals to be used, functions
and measuring ranges are correct, when using the
meter for measurement or output.
Voltage current signal source (Volt/mA Calibrator) is a Volt/mA
source and measuring tool used in tests on 0-24 milliampere
current circuit and 10 V DC voltage. This calibrator can not be
used for measurement and output simultaneously.
2. General information
Measurement/output 0-100mV
0-10VMeasurement/output V
0 to 24 mA (-25% to 125%)Measuring output mA/ (% of span)
24 V DCLoop power
To Next Page
Loading...