c) START RECORD
Press the "F1" key (ENTER) to start recording. The recording
session is executed until:
- the internal memory is exhausted
- the voltage of the battery for supplying the meter is insufficient
- the function selector switch is turned to another measurement
function
- or by pressing "F4" (STOP) to complete the measurement.
6.7. Viewing Trend Data
The recorded measurement data, which are stored in the internal
memory of the instrument can be viewed at a later time. Viewing this
data is performed by the SAVE-menu.
- Press the push button "F3" (SAVE) opens the menu of the
device memory.
- Press the push button "F3" (DOWN) until the menu item VIEWR
is selected and press "F1" (ENTER).
- Press the push button "F1" (TREND), to enter the trend display
of the stored measurement values.
-102-
To Next Page
Loading...
