PeakTech 3440 - Setup Options; Resetting the Meter

7. Setup Options
All settings for the device can be done via the Device menu.
- Press push button "F3" (DOWN) to select SETUP and press
"F1" (ENTER) to confirm.
7.1. Resetting the Meter
With the "Setup Options" can set the default values of the meter will
be reset to the factory settings. Press the "F3" (SAVE) button to
open the Save-menu. Press the push button "F3” (DOWN) to select
the menu item "SETUP” and confirm it with “F1" (ENTER).
In the LCD display another menu selection appears.
Select "F3" (DOWN) the menu option "RESET" and press the "F1"
key (ENTER).
The LCD displays a confirmation prompt, which has to be confirmed
again by pressing the "F1" key (OK) for the device reset is
performed appears.
-105-