PeakTech 3440 User Manual

6. Default Display
6.1 Graph Measure
Press the push button “F1” (GRAPH) to switch into the Graph-
measurement.
Press soft key “F1” (START) button. Press “F2” (FAST) or “F3”
(SLOW) push buttons to select sampling rate. Press “F4” (CANCEL)
push button to exit the graphical measurement and return to normal
measurement mode.
-96-

PeakTech 3440 Specifications

General

Brand	PeakTech
Model	3440
Category	Multimeter
Language	English