1.3. Safety Symbols
TÜV/GS approved; TÜV-Rheinland
Attention! Read the corresponding Section in the
manual. Failure to comply entails risk of injury and /
or the risk of damage to the device.
max. allowable voltage difference of
1000 V DC/ACrms between COM / V or ohm input
and earth does not exceed for safety reasons.
Dangerous high voltage is applied between the
inputs. Extreme caution in the measurement. Do not
touch inputs and measuring tips. Safety instructions
in the user manual note!
This WARNING / CAUTION symbols indicate a
potentially hazardous situation, which if not
avoided, may result in minor or moderate injury,
or damage to the product or other property.
-65-
Caution: refer to the instruction manual. Incorrect use may
result in damage to the device or its components.
AC (Alternating Current)
DC (Direct Current)
AC or DC
Earth ground
Double insulated
Fuse
Conforms to European Union directives
To Next Page
Loading...
Need help?
General
