1. TFT / LCD display with an indication of max. 50,000
2. Function keys F1, F2, F3, F4 to select and control the menu
functions
3. HOLD / REL key: data hold, relative value measuring function
4. Function / Range switch: To select the desired measurement
function or the measuring range
5. RANGE button: Switch to manual range selection
6. COM input jack: Input jack for the black test lead for all
measurement functions
V / / Hz / -II- / input jack: input connector for red test lead for
all measurement functions except current measurements.
uA / mA input jack: input socket for AC / DC current
measurements of <500mA
10A input jack: input socket for AC / DC current measurements
of 500mA to 10A.
-67-
To Next Page
Loading...
Need help?
General
