MAN 06 033774 – technical_guide_ DIRIS_A40_A41_C.doc40/Z41 - B 2/27
SUMMARY
1 – PULSE OUTPUTS MODULE ______________________________________________________ 3
1.1 - Application : _________________________________________________________________ 3
2 – 2 ANALOG OUTPUTS MODULE ___________________________________________________ 4
2.1- Application : __________________________________________________________________ 4
3 – 2 INPUTS / 2 OUTPUTS MODULE _________________________________________________ 7
3.1- Operation of outputs in monitoring (alarms) ________________________________________ 7
3.2- Operation of outputs in command ________________________________________________ 9
3.3- Use of the input for pulses counting _____________________________________________ 11
3.3- Use of inputs for control position ________________________________________________ 12
4 – RS 485 JBUS/MODBUS COMMUNICATION MODULE _________________________________ 13
4.1 - Reading of electrical values on 2 words with HEX 300 table __________________________ 14
4.2 - reading of electrical values on 1 words with HEX 700 _______________________________ 18
4.3 - Modification of DIRIS configuration with “writing” function. _________________________ 21
5 – MEMORY MODULE _______________________________________________________ 22
5.1. Powers demands configuration (P+/P-/Q+/Q-) ______________________________________ 22
5.2. Configuration of voltage dips function (SAG) ______________________________________ 25
To Next Page
Loading...
Need help?
General
