-11-
2. Introduction
The P 5315 is used to measure the pH of various liquids. The
removable pH probe makes it possible, after the respective
measurement, to thoroughly rid the device and the probe of
residues of the liquid to clean them.
With the adjustment screws next to the on / off switch, you are able
to calibrate the pH meter with buffer liquids (a screwdriver is
included in the delivery). To protect the measuring electrode, a
protective cap is attached to the end of the P 5315 (this is removed
during the measurement).
* Illuminated display
* Adjustment screws for calibration
* Measuring probe which can be screwed off
* Electrode protective cap
* Easy on / off by dip - switch
To Next Page
Loading...
Need help?
General
