PeakTech 8005 User Manual

* Press “REC”-button to activate the usb-communication
* Choose “Real time”-function for real-time measurements and the function “Setup”. In this window
you can adjust the data you need for your measurement, i.e. max record values (max. 20000),
sample rate (0,1 to 10 seconds) and the chronological limits from beginning to the end.
* Choose the function “Run” under the “Real time”-menu in the main menu.
* Now, the software will record measuring values directly from the instrument.
* After finishing the measurement, the software shows you a message, where you should save
your values (TXT or XLS-Format).
4.2. Operation with the internal memory of the PeakTech 8005 (Datalogger)
With the datalogger it is possible to record and save sound level without connection to any PC. The
measured values (max. 32000 values) will be saved to the internal memory of the unit, which can
download with help of the delivered software to the PC later.
* press the “REC”-button to activate the datalogger
* in the display appears “REC” and the “ -symbol” disappears. Now the datalogger is started
and record measurement values 1 time per second.
* If the measurement is finished, press “REC”-button to deactivate the datalogger. “REC”
disappears in the display.
Note:
If the memory is completely of the capacity, in the display appears “FULL”.
The memory has to be erased for measurements, which will be made at a later time.
-25-

PeakTech 8005 Specifications

General

Brand	PeakTech
Model	8005
Category	Measuring Instruments
Language	English