EasyManua.ls Logo

Peaq PMS310BT-SL - PEAQ PMS310 BT-SL DAB+ Settings and Modes; Alarm and Sleep Timer Configuration; Sound Adjustment and Mode Selection; DAB Radio Initial Scan and Setup

Peaq PMS310BT-SL
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Size = A5
23
ENGLISH
Operation
TURNING THE UNIT ON
Press the button to switch on the unit.
ADJUSTING THE ANTENNA
For optimal reception, extend the antenna,
move to fully extend and adjust it.
ADJUSTING THE VOLUME
The volume can be adjusted during play-
back with the volume control.
General Setting
TIME SETTING
The time can only be set in standby mode:
1. Press the CLOCK button for approx. 2
seconds. Select a time format (24/12
hrs) with the
/ button and con-
rm with CLOCK button.
2. The time (hr) appears ashing on the
display. Set the time (hr and min) with
/ button and confi rm each with
CLOCK button.
ALARM SETTINGS
The timer setting can only be set in stand-
by mode.
1. Press and hold ALARM on the remote
control. On the display appears shortly
“TIMER”.
2. Use
/ to select one of the fol-
lowing alarm mode:
FM > DISC > USB > DAB
Confi rm by pressing ALARM.
3. Set the time (hr and min) with the
/
button and confi rm each with
ALARM button.
4. Set the volume of the alarm with the
/ button and confi rm with
ALARM button.
5. The alarm is set and “TIMER” appears
on the display.
6. To turn off the alarm, press ALARM.
SLEEP TIMER
1. Press SLEEP to select a period:
SLEEP OFF
SLEEP 120
SLEEP 90
SLEEP 60
SLEEP 45
SLEEP 30
SLEEP 15
2. The sleep timer is set and “SLEEP” ap-
pears on the display.
3. To turn off the sleep timer, press
SLEEP repeatedly to select “SLEEP
OFF”. “SLEEP” disappears from the
display.
EQUALISER
You can adjust the sound setting directly
with the button EQ on the remote control:
FLAT > CLASSIC > ROCK > POP > JAZZ
Mode
Press or SOURCE to select between:
USB
DAB
FM
AUX IN
BT
DISC
DAB-Mode
When the radio is switched on for the fi rst
time, it will automatically do a full scan of
DAB/DAB+ stations. The list of stations is
then stored, eliminating the need for an-
other full scan when the radio is turned on
next time.
When the scan is complete, the stations
are stored in alphabetical order. The fi rst
available station will be played back.
Note:
If there is no DAB reception at any time,
change the position of the unit or adjust
the antenna.
CHANGING DAB/DAB+ STATIONS
1. Press TUN+/- in DAB mode to navi-
gate available DAB/DAB+ stations.
2. To confi rm, press the button.
IM_PMS310BT-B_170920_A_V03_HR.indb 23 20/9/17 10:33 am

Table of Contents

Related product manuals