Size = A5
ENGLISH
24
STORING DAB STATIONS
Press button MENU in DAB mode un-
til “FULL SCAN” appears on the display.
Press the
button to confi rm.
The unit scans all available DAB/DAB+ sta-
tions and plays the fi rst available station.
Note:
New stations and services are added to
the stored DAB/DAB+ stations. In order
to make new DAB/DAB+ stations and ser-
vices available on your radio, run a full scan
at regular intervals.
DISPLAYING STATION INFORMATION
1. Select a DAB station.
2. During DAB/DAB+ radio playback,
press INFO repeatedly to display the
following information (if available):
• Ensemble
• Frequency
• Signal frequency error
• Audio state and bit rate
• Time
• Date
• Radio text
• Signal strength
• Programme type
SELECTING PRESET DAB STATIONS
1. Press SOURCE to select the DAB/
DAB+ mode.
2. Use TUN+/- to select a preset number
and confi rm your selection by pressing
button.
USING THE DAB/DAB+ MENUS
In DAB mode press MENU until display
shows „FULL SCAN“ and use TUN+/- to
browse the menu options. To confi rm your
selection press
every time.
• FULL SCAN
Searches for all available DAB/DAB+ sta-
tions.
• MANUAL
Manual tuning adjustment, for example
aligning the antenna or adding stations.
• DRC
Dynamic Range Control (DRC) removes
or adds the degree of adaptation, re-
quired for the diff erences in dynamic
range between stations.
• PRUNE
Removes all invalid stations from the sta-
tion list.
• SYSTEM
System setting:
• RESET
• SW-Version
Dynamic Range Control (DRC)
Dynamic Range Control removes or adds
the degree of adaptation, required for the
diff erences in dynamic range between sta-
tions.
• Press TUN+/- until „DRC“ is shown on
the display and turn on/off DRC with
.
PRUNE
Removes all invalid stations from the sta-
tion list.
1. Press TUN+/- until „PRUNE“ appears
on the display and confi rm with .
2. Use TUN+/- to select „Y/N“ and con-
fi rm with .
IM_PMS310BT-B_170920_A_V03_HR.indb 24 20/9/17 10:33 am
To Next Page
Loading...