3
LEVEL (1)
Controls the volume level of the system.
SUBSONIC FILTER (2)
The "in" position of this switch activates the 18 dB/octave subsonic filter at 42 Hz. The "out" position
removes the subsonic filter from the system.
POWER ON LED (3)
Indicates when AC power is being supplied to the unit.
SPS™ ACTIVE LED (4)
Illuminates when SPS™
circuitry is active. SPS™
eliminates power amplifier clipping.
ACTIVITY (SIGNAL PRESENT) LED (5)
Indicates signal presence at amplifier output. Illuminates when output is approximately 35 dB below full
power.
POWER SWITCH (6)
Depress to "on" position to turn on.
To Next Page
Loading...
