Need help?Do you have a question about the Peavey IPR 3000 and is the answer not in the manual?
General| Type | Power Amplifier |
|---|---|
| Number of Channels | 2 |
| Power Output | 3000 W |
| Frequency Response | 20 Hz - 20 kHz |
| Input Sensitivity | 1.4V |
| Cooling | Variable speed fan |
| Signal to Noise Ratio | > 100 dB |
| Damping Factor | > 200 |
| Input Impedance | 20 kOhms |
| Connectors | XLR, 1/4" TRS |
| Dimensions | 19" x 3.5" |
| Protection | Thermal, short circuit |
English safety warnings and cautions regarding electrical hazards and product care.
Numbered safety guidelines for installation, operation, and maintenance.
Overview of the IPR amplifier series, its design, and primary features.
Detailed description of front panel elements including power switch and status LEDs.
Description of the AC power inlet and the channel mode selection switch.
Explanation of output jacks, input connections, and the circuit breaker function.
Guide to initiating and navigating the amplifier's Setup Wizard for configuration.
Setting input modes for mono or stereo operation within the Setup Wizard.
Adjusting EQ curves and setting remote speaker delay within the Setup Wizard.
Managing DSP settings security and setting an access code.
Navigating the Main Menu and adjusting mode and volume settings.
Configuring crossover frequencies and high-pass filters for each channel.
Adjusting EQ activation and using MaxxBass enhancement.
Detailed adjustments for parametric EQ bands and horn EQ.
Setting and managing delay parameters for remote speaker synchronization.
Managing DSP security settings and automatic storage of configurations.
Information on warranty coverage, duration, and how to obtain service.
To Next Page
