Peavey IPA 150 TII - Specifications; Block Diagram

6
BLOCK DIAGRAM
SPECIFICATIONS
Output Power (IPA 75T II):
75 watts
Output Power (IPA 150T II):
150 watts
Frequency Response:
Direct: ±0.5 dB, 20 Hz to 20 kHz
XFMR: ±0.5 dB, 50 Hz to 20 kHz
Distortion:
0.03% (1 kHz)
S/N Ratio (20 kHz BW):
95 dB
Power Bandwidth:
Direct: 20 Hz to 20 kHz < 0.5%
THD
XFMR: 50 Hz to 20 kHz < 0.5%
THD
Output Regulation:
Direct: < 0.5 dB
XFMR: < 1.0 dB
Outputs:
Direct: 4 ohms
XFMR: 8 ohms, 600 ohms, 25 V, and
70 V (balanced)
Input Sensitivity:
1 volt @ 40 K ohms or 100 mV @
3.6 K ohms (switchable)
Controls:
Level Control
Subsonic Switch
Power Switch
Indicators:
Power Indicator (Red LED)
Activity Indicator (Green LED)
SPS™ Active Indicator (Yellow
LED)
(IPA 75T II)
Power Requirements:
120 V AC, 60 Hz, 200 watts
(IPA 150T II)
Power Requirements:
120 V AC, 60 Hz, 400 watts