Need help?Do you have a question about the Peavey ICA 1200 and is the answer not in the manual?
General| Power Output | 1200 W |
|---|---|
| Channels | 2 |
| Signal-to-Noise Ratio | > 100 dB |
| Weight | 38 lbs |
| Type | Power Amplifier |
| 8 Ohms per channel | 300 W |
| Inputs | XLR, 1/4" TRS |
| THD | < 0.1% |
| Impedance | 2 Ohms |
| Frequency Response | 20 Hz to 20 kHz |
| Dimensions | 19" |
| 2 Ohms per channel | 1200 Watts |
| 8 Ohms Bridged | 1200 Watts |
| Outputs | Binding posts, Speakon |
| Cooling | Fan-cooled |
Initial connection and power-on procedures.
Details power control and standby function.
Details power requirements and circuit breaker considerations.
Explains stereo, parallel, and bridged operation modes.
Automatic gain reduction at clipping point.
Gain reduction for abnormal loads.
To Next Page
