Peavey IRM 8150 - Channel Section; Level Control; Monitor Control; EQ Controls

3
CHANNEL SECTION:
LEVEL (1)
Controls the channel output level. This signal is routed via the main bus to the main level control. The channel
level also affects the signal to the AUX send control.
MONITOR (MON.) (2)
Controls the channel monitor mix level. This is independent of all other channel controls. Controls the amount of
signal from a particular channel in the monitor mix. This signal is routed to the Mon. control in the master
section.
LOW EQ (3)
Controls the channel low EQ level. An active tone control (shelving type, ±12 dB) that varies the low frequency
range.
MID EQ (4)
Controls the channel mid EQ level. An active tone control (peak/notch, ±12 dB) that adjusts the mid frequency
range.
HIGH EQ (5)
Controls the channel high EQ level. An active tone control (shelving type, ±12 dB) that varies the high frequency
range.