Need help?Do you have a question about the Peavey JSX 212 and is the answer not in the manual?
General| Power Output | 120 Watts |
|---|---|
| Speaker Configuration | 2x12 |
| Channels | 3 |
| Reverb | Yes |
| Effects Loop | Yes |
| Weight | 75 lbs (34 kg) |
| Color | Black |
| Impedance | 4, 8, or 16 Ohms |
| Type | Tube Guitar Amplifier |
| Speakers | Peavey Sheffield 1200 |
Controls mains power to the unit. The POWER STATUS LAMP illuminates when ON.
Allows the amp to be placed in STANDBY mode, keeping tubes hot but not operational.
Sets the overall volume level of the amplifier, balancing channel output.
Varies high frequency response on Ultra and Crunch channels (+/- 12 dB).
Varies mid frequency response on Ultra and Crunch channels (+/- 12 dB).
Varies low frequency response on Ultra and Crunch channels (+/- 12 dB).
Sets the overall level of its respective channel (Clean, Crunch, Ultra).
Controls input volume, affecting preamp distortion and sustain.
Three-position switch to select between the amplifier's three channels.
Sets the level of signal sent to external effects and/or signal processors.
1/4" jacks for sending signal to and returning signal from external effects.
Standard IEC power connector for AC mains connection.
Heavy duty, three-conductor cord with a conventional 120 VAC plug.
Selects between Ultra and Crunch channels. LED illuminates when Ultra is active.
Selects the Clean channel. LED illuminates when Clean is active.
Activates the amplifier's effects loop. LED illuminates when the loop is active.
Details on tubes, rated power, frequency response, hum & noise, and power consumption.
Details on tubes and specifications for EQ, volume, gain, and effects controls.
To Next Page
