EasyManua.ls Logo

Peavey Mark III 300 CHS User Manual

Peavey Mark III 300 CHS
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Peavey Mark III 300 CHS and is the answer not in the manual?

Peavey Mark III 300 CHS Specifications

General IconGeneral
BrandPeavey
ModelMark III 300 CHS
CategoryMusical Instrument Amplifier
LanguageEnglish

Summary

Front Panel Controls and Indicators

HIGH GAIN INPUT (1)

Primary input for most electric guitars, offering higher gain than the Low Gain input.

LOW GAIN INPUT (2)

For high-output instruments to prevent overdrive of the High Gain input.

PRE GAIN (3)

Controls the input volume level of the amplifier, affecting the preamp stage.

BRIGHT SWITCH (4)

Provides a preset boost (±8 dB) to treble frequencies for enhanced clarity.

PUNCH SWITCH (5)

Offers a preset boost (±8 dB) to midbass frequencies for added punch.

POST GAIN (6)

Controls the overall volume level of the amplifier after desired tone is set.

LINE PATCH (7)

Connects external effects devices into the signal path via send and return jacks.

LOW (8)

Active tone control (shelving type, ±15 dB) for adjusting low frequencies.

GRAPHIC EQUALIZER (9)

Seven-band graphic equalizer offering ±15 dB boost or cut at each center frequency.

HIGH (10)

Active tone control (shelving type, ±15 dB) for adjusting high frequencies.

COMPRESSION LED (11)

Indicates when the DDT compression circuit is active to prevent distortion.

PILOT LED (12)

Illuminates to show that AC power is supplied to the amplifier.

System Features and Connectivity

LINE CORD (13)

Features a 3-wire grounded line cord for safety and noise reduction.

FUSE (14)

Protective fuse, must be replaced with the same type and value to prevent damage.

POWER SWITCH (15)

Controls the power supply to the amplifier, with positions for grounding.

SPEAKER OUTPUT JACKS (16)

For connecting external speaker(s) with a minimum total impedance of 4 ohms.

Technical Specifications

POWER AMP SECTION

Details rated power, load impedance, clipping characteristics, frequency response, and distortion.

PREAMP SECTION

Specifications for preamp input/output levels, impedance, and equalization ranges.

TONE SETTING CHART

Provides example tone settings for Rock, Funk, and Country genres for guidance.

Limited Warranty Information

LIMITED WARRANTY (PEAVEY ONE-YEAR)

One-year warranty on materials and workmanship, with exclusions and limitations.

90-DAY LIMITED WARRANTY ON TUBES AND METERS

Ninety-day warranty specifically for tubes and meters included in the product.

WARRANTY CONDITIONS AND EXCLUSIONS

Details conditions voiding the warranty, including misuse, alteration, or unauthorized service.

OBTAINING WARRANTY SERVICE

Instructions on how to obtain warranty service, including dealer or service center contact.

Important Safety Instructions

GENERAL SAFETY PRECAUTIONS

Essential safety guidelines for operating the product, including electrical and environmental hazards.

HEARING PROTECTION ADVISORY

Warning about potential hearing loss from high noise levels and recommended protection.

Related product manuals