Need help?Do you have a question about the Peavey MegaBass and is the answer not in the manual?
General| Power Output | 300 Watts RMS @ 4 Ohms |
|---|---|
| EQ | Low, Mid, High, 7-band Graphic EQ |
| Inputs | 1 x Instrument |
| Outputs | 1 x Speaker Output, 1 x Preamp Out, 1 x Direct Out |
| Type | Bass Amplifier |
Alerts users to dangerous voltage and risks of electric shock or fire.
Illustrates the signal flow and functional connections within the amplifier.
Details High/Low Impedance Inputs, Pre Gain, and Input Pad Switch functions.
Covers Pre-EQ Patch Jack, Return Level, and Punch Switch for tone modification.
Explains the 7-Band Graphic EQ and Bright Switch for tone shaping.
Details Post Gain controls, Biamp/Full Range switch, and Preamp Output.
Describes Chorus function, Rate, Depth, and On/Off switch for modulation effect.
Explains Crossover Frequency control and the main Power Switch.
Details AC Line Cord Socket, Fuse, and Low Range Speaker Outputs.
Covers High Range Speaker Outputs and auxiliary Preamp Out jacks.
Explains cooling system and Full Range Preamp Out/Power Amp In jacks.
Details power output, impedance, frequency response, and distortion.
Explains DDT compression feature and crossover specifications.
Provides essential safety guidelines, operating precautions, and user warnings.
Information regarding Class B computing device compliance and interference.
Outlines limited warranty coverage, exclusions, and registration instructions.
To Next Page