Need help?Do you have a question about the Peavey Max 450 and is the answer not in the manual?
General| Power Output | 450W |
|---|---|
| Speaker Configuration | 1 x 15" |
| Number of Channels | 2 |
| Effects Loop | Yes |
| Type | Bass Amplifier |
| Preamp | Solid State |
| EQ | 3-band |
| Inputs | 1 x 1/4" (instrument) |
| Outputs | 1 x 1/4" |
| Footswitch I/O | Yes |
Alerts users to uninsulated dangerous voltage and the risk of electric shock.
Indicates important operating and maintenance instructions are in the accompanying literature.
Advises against opening the unit and to refer servicing to qualified personnel.
Warns against exposing the appliance to rain or moisture to prevent shock or fire.
Essential safety rules for product operation, environment, and cleaning.
Safety guidelines for electrical plugs, cords, and specific wiring conventions.
Proper use of accessories, carts, and guidelines for servicing.
Information on grounding, rack mounting, and permissible noise exposure levels.
Welcomes the user and introduces the amplifier's key tone-shaping features.
Highlights various connectivity options and control features of the amplifier.
Lists specific features like compact design, power output, EQ, contour, and protection.
Details the IEC line cord connection for AC power and safety guidelines.
Explains the function of the power switch for turning the unit on and off.
Describes the three-position switch for minimizing hum or noise.
Locates the fuse and provides instructions for safe replacement.
Explains the LED indicator for power status and DDT/clipping.
Covers the main input jack and the -10 dB pad switch for high-output instruments.
Describes the bright boost switch and the buffered tuner send jack.
Details the pre-gain, contour, low, mid, mid-shift, and high EQ controls.
Controls the overall amplifier volume and provides balanced line out signal.
Manages line out level and selects pre/post EQ for the line out.
Features a ground lift switch and effects send jack for external processing.
Input for effects return and switch to defeat DDT speaker protection.
Jacks for preamp out, power amp in, and speaker cabinet connections.
Details mains power, fuse, consumption, and noise performance parameters.
Outlines amplifier protection, load, power ratings, noise, DDT, and frequency response.
Specifies settings for measurements and details input, EQ, tuner, line out, effects, and preamp out specs.
Illustrates the internal signal flow from input to output, including EQ and effects.
Recommended control settings for achieving a "Rock" tone on the amplifier.
Recommended control settings for achieving a "Slap" tone on the amplifier.
Recommended control settings for achieving a "Blues/Country" tone on the amplifier.
Defines what the warranty covers and explicitly lists what is excluded.
Specifies who is protected by the warranty and its duration.
Details the repair/replacement process and how to obtain warranty service.
Outlines limitations on implied warranties and exclusion of damages.
To Next Page
