Peavey PVXp 10

Loudspeaker System Specifications
33
Fig. 47 Display Dim highlighted Fig. 47A Display Dim Selected
Push in the "Push for DSP" knob in to select the Display Dim choice.
You can now change the Display to Dim, and the selection will show that the
function is "On", see Fig. 48.
Fig. 48 Display Dim turned On
This will reduce the brightness of the display, so that when the speaker system is
used as a floor monitor, the LCD screen is not so bright towards the audience, or
if it needs to be dimmed for on stage use. The screen will dim once the
navigation knob is not moved for 10 seconds.
AutoLink
Auto Link allows two speakers in range of each other to automatically link to form
a stereo or dual mono system.
Fig. 49 Fig. 50 Fig. 51
See Bluetooth® Controls and the Auto Link section for more details.
Front LED
From the Config Menu Selection screen (Fig. 46), if you turn the "Push for DSP"
knob (9) CW three notches, the Front LED choice will be highlighted, see Fig. 52.