Peavey TKO User Manual

14
Tour
™
Series Specications
Mains Voltage:
7"$)['"-7
7"$)['"-7
7"$)['"-7
Power Consumption:
600 W
Power Amplifier
Protection:
DDT™ speaker protection with defeat
switch
Short Circuit protection
Thermal protection circuit
Cooling fan failure protection circuit
Current limit protection circuit
DC output protection circuit
Minimum Load:
4 Ω
Input Sensitivity:
600 mVRMS
Output Jacks:
5XP4QFBLPO¥DPNCJOBUJPO
jacks in parallel
Power Output:
X73.4Ȱ
 X73.4Ȱ
Noise:
> 100 dB below full power @ 8 Ω
typically -105 dB
Preamplifier Specifications
Settings (unless otherwise stated):
Pre gain: 4 (12 o'clock)
Bright: Out
Mute: out
Contour: 0 (fully counterclockwise)
Low: 0
High: 0
Low Cut: Out
Graphic EQ: All sliders set to center
EQ Bypass: Out
Post Gain: 10 (fully clockwise)
Octaver: MIN
(fully counterclockwise)
Octaver Defeat: Out
DDT™: Active
Input Sensitivity (High Gain):
Nominal Input: 616 mVRMS
Minimum Input: 34.1 mVRMS
Maximum Input: 2.3 VRMS
(maximum signal at input before clipping)
Input Sensitivity (Low Gain):
Nominal Input: 1.0 VRMS
Minimum Input: 59.3 m VRMS
Maximum Input: 7.2 VRMS
(maximum signal at input before clipping)
Tuner Send:
Buffered from input jack with no
equalization
D.I. XLR Output:
Buffered from input jack with no
equalization
Failsafe D.I. Backup:
48 v phantom power
Weight:
75 lbs.
Dimensions (h x w x d):
YY
Tour Series TNT Combo
Features and specifications subject to change without notice.
All specifications tested with mains voltage maintained at nominal level.

Peavey TKO Specifications

General

Brand	Peavey
Model	TKO
Category	Amplifier
Language	English