Peavey TLM 5 User Manual

SPECS
P E A V E Y E L E C T R O N I C S
TLM
™
5
Low-Profile
Stage Monitor
SPECIFICATIONS
Enclosure:
TLM
™
5
Frequency Response:
75 Hz to 17 kHz
Low-Frequency Limit (-3 dB point):
75 Hz
Usable Low-Frequency Limit
(-10 dB point):
55 Hz
Power Handling:
300 watts program
600 watts peak
Sound Pressure Level • 1 Watt at
1 Meter • Swept-Sine Input in
Anechoic Environment:
98 dB
Maximum Sound Pressure Level:
118 dB
Transducer Complement:
One 14XT
™
titanium compression driver
loaded onto a CH
®
-3 horn
One 15" SH 15835 woofer
Box Tuning Frequency (Fbox):
85 Hz
Crossover Frequency:
2.2 kHz
Crossover Type:
Internal passive two-way
Crossover Slope:
12 dB/octave high and low pass
Impedance (Nominal):
8 ohms
Impedance (Minimum):
5.1 ohms
Input Connections:
Two 1/4" full-range connectors
Enclosure Materials and Finish:
Durable black carpet
Mounting:
SA-1
™
stand adaptor
Dimensions (H x W x D):
16" x 25" x 18-7/8"
(40.64 cm x 63.5 cm x 47.94 cm)
Net Weight:
50lbs. (22.7 kg)
Shipping Weight:
57 lbs. (25.9 kg)
DESCRIPTION
The TLM 5 is a full-range, low-profile
stage monitor designed to ensure the
performer the most accurate
representation of sound. This monitor is
at the leading edge of technology, with
the high frequencies supplied by a
14XT
™
titanium-diaphragm compression
driver. The internal, full-range
crossover, blends the 15-inch woofer
with the 14XT for the optimum monitor
response.
The enclosure can be vertically mounted
on its stand adaptor or placed on-stage at
either 30 or 45 degrees. The SA-1 stand
adaptor allows for the use of a speaker
stand to elevate the enclosure.
The TLM
5 is covered with a durable black
carpet and an expanded metal grille is
added for speaker protection.
ARCHITECTURAL
& ENGINEERING
SPECIFICATIONS
The loudspeaker system shall have an
operating bandwidth of 75 Hz to
17 kHz. The output level shall be 98dB
when measured at a distance of one
meter with an input of one watt. The
nominal impedance shall be 8 ohms.
The program power handling shall be
300 watts with maximum peak of
600 watts and minimum amplifier
headroom of 3 dB. The outside
dimensions shall be 16 inches high by
25 inches wide by 18-7/8 inches deep.
The weight shall be 50 lbs. The
loudspeaker system shall be a Peavey
model TLM.
®

Peavey TLM 5 Specifications

General

Brand	Peavey
Model	TLM 5
Category	Speakers
Language	English

Summary

Product Specifications

Enclosure Details

Details the enclosure type and construction of the TLM 5 stage monitor.

Frequency Response Range

Specifies the audible frequency range the TLM 5 can reproduce.

Low-Frequency Limit (-3 dB)

Indicates the frequency at which output drops by 3 dB.

Usable Low-Frequency Limit (-10 dB)

Defines the lowest frequency with acceptable output (-10 dB).

Power Handling Capacity

States the power capacity in watts for program and peak.

Sound Pressure Level (1W/1m)

Measures sensitivity at 1 meter with 1 watt input in anechoic conditions.

Maximum Sound Pressure Level

Specifies the highest sound pressure level the unit can produce.

Transducer Complement

Lists the drivers and horns used in the TLM 5's construction.

Box Tuning Frequency

Indicates the resonant frequency of the enclosure's porting.

Crossover Frequency

Defines the frequency at which signal is split between drivers.

Crossover Type and Slope

Specifies the internal crossover design and attenuation rate.

Impedance Specifications

States the nominal and minimum electrical impedance of the speaker.

Input Connections

Lists the types of connectors used for audio input.

Enclosure Materials and Finish

Describes the external materials and finish of the speaker cabinet.

Mounting Options

Details the available mounting options for the stage monitor.

Physical Dimensions

Provides the physical height, width, and depth of the unit.

Weight Information

States the net and shipping weight of the speaker system.

Product Description

Architectural and Engineering Specs

Limited Warranty Information