Peavey DTH 4215 User Manual

SPECIFICATIONS
DTH
®
4215
Minimum-Profile
Loudspeaker
SPECIFICATIONS
Frequency Response, 1 Meter
On-Axis, Swept-Sine in Anechoic
Environment:
50 Hz to 18 kHz
Low Frequency Cut-Off (-3 dB point):
50 Hz
Usable Low Frequency Limit
(-10 dB point):
36 Hz
Power Handling:
Full Range:
600 W continuous (49 V RMS)
1,200 W program
2,400 W peak
Biamp Low:
600 W continuous (49 V RMS)
1,200 W program
2,400 W peak
Biamp High:
80 W continuous (25.3 V RMS)
160 W program
320 W peak
Sound Pressure Level, 2.0 V (1 watt)
1 Meter in Anechoic Environment:
98 dB
Maximum Sound Pressure Level:
124 dB
Radiation Angle Measured at -6 dB
Point of Polar Response:
500 Hz to 1.6 kHz:
Horizontal 91° ±14°
Vertical 100° ±24°
1.6 kHz to 5 kHz:
Horizontal 86° ±14°
Vertical 63° ±32°
5 kHz to 16 kHz:
Horizontal 56° ±19°
Vertical 38° ±7°
Directivity Factor, Q (Mean):
8.9 ±5
Directivity Index, Di (Mean):
9.5 ± 2
Transducer Complement:
Two 1505-8 DT Black Widow
®
woofers
One 44XT
™
compression driver coupled to
a CH
™
7 constant-directivity horn
Box Tuning Frequency:
48 kHz
Crossover Frequency:
2 kHz
Time Offset:
0.69 mS (delay lows)
Impedance (Z):
4 ohms nominal
3.8 ohms minimum
Input Connections:
Two Neutrik
®
four-conductor Speakon
®
connectors (NL4MD-V-1)
Enclosure Materials and Finish:
3/4" plywood with polyurethane coating
and powder coated metal grille with
black foam overlay

Peavey DTH 4215 Specifications

General

Brand	Peavey
Model	DTH 4215
Category	Speakers
Language	English

Summary

Speaker Specifications

Transducer Complement

Details the drivers and horn used in the loudspeaker system.

Impedance Characteristics

Specifies the nominal and minimum impedance of the speaker.

Input Connections

Identifies the type and number of input connectors.

Enclosure Materials and Finish

Describes the construction materials and exterior finish.

Product Features

Operating Modes

Highlights switchable full-range/biamp operation.

Key Components

Lists primary drivers like Black Widow woofers and compression driver.

Construction Highlights

Notes features like polypropylene capacitors and metal grille.

System Description and Performance

Product Description

Explains the minimum-profile design and enclosure geometry.

Frequency Response

Details the speaker's frequency range and measurement method.

Power Handling

Explains the rating methodology and power capacity.

Directivity Characteristics

Describes beamwidth and directivity factors derived from polar plots.

Wiring and Connectivity

Loudspeaker Wiring Diagram

Illustrates the wiring for the DTH 4215 and DTH 218b.

Speakon Connector Schemes

Details the wiring for 4-pin and 8-pin Speakon connectors.

Warranty and Safety Information

One Year Limited Warranty

Provides details and contact information for the warranty.

Hearing Safety Warning

Advises on permissible noise levels and hearing protection.