Peavey Vypyr VIP 2


8 pIN mIDI8 pIN mIDI
Connect your SanperaConnect your Sanpera
®®
I or Sanpera II here. I or Sanpera II here. This particular style of MIDI jack provides powThis particular style of MIDI jack provides power to theer to the
Sanpera foot controllers and is required for their operation.Sanpera foot controllers and is required for their operation.
pOWEr SWItCHpOWEr SWItCH
This two-way rocker switch applies power to the unit when placed in the ON position.This two-way rocker switch applies power to the unit when placed in the ON position.
CautION:CautION:
The on/off switch in this unit does not break both sides of the primary mains. Hazardous engeryThe on/off switch in this unit does not break both sides of the primary mains. Hazardous engery
can be present inside the chassis when the on/off switch in in the OFF position.can be present inside the chassis when the on/off switch in in the OFF position.
aC pOWEr INLEtaC pOWEr INLEt::
This is the receptacle for an IEC line cord, which provides AC power to the unit. Connect the line cord toThis is the receptacle for an IEC line cord, which provides AC power to the unit. Connect the line cord to
this connector to provide power to the unit. Damage to the equipment may result if improper line voltage isthis connector to provide power to the unit. Damage to the equipment may result if improper line voltage is
used. (See line voltage marking on unit).used. (See line voltage marking on unit).
Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used does notNever break off the ground pin on any equipment. It is provided for your safety. If the outlet used does not
have a ground pin, a suitable grounding adapter should be used and the third wire should be groundedhave a ground pin, a suitable grounding adapter should be used and the third wire should be grounded
properly.properly.
To prevent the risk of shock or fire hazard, always make sure that the amplifier and all associatedTo prevent the risk of shock or fire hazard, always make sure that the amplifier and all associated
equipment is properly grounded.equipment is properly grounded.

NOtE: FOr u.K. ONLyNOtE: FOr u.K. ONLy
As the colors of the wires in the mains lead of this apparatus may not correspond with the colored markingsAs the colors of the wires in the mains lead of this apparatus may not correspond with the colored markings
identifying the terminals in your plug, proceed as follows:identifying the terminals in your plug, proceed as follows:
(1) The wire which is colored green and yellow must be connected to the terminal which is marked by the(1) The wire which is colored green and yellow must be connected to the terminal which is marked by the
letter E, or by the Earth symbol, or colored green or green and yellow. (2) The wire which is colored blueletter E, or by the Earth symbol, or colored green or green and yellow. (2) The wire which is colored blue
must be connected to the terminalmust be connected to the terminal
which is marked with the letter N, or the color black. (3) The wire which is colored brown must be connectedwhich is marked with the letter N, or the color black. (3) The wire which is colored brown must be connected
to the terminal which is marked with the letter L, or the color red.to the terminal which is marked with the letter L, or the color red.
Engineeing NoesEngineeing Noes

11
22
00
00
11
22