Peavey Vypyr VIP 2


VarIabVarIabLE INStrumENt LE INStrumENt INputINput
On the VIP 1, you can input an electric, an acoustic, or a bass guitar. On the VIP 1, you can input an electric, an acoustic, or a bass guitar. There are amp models for all 3There are amp models for all 3
instrument types. instrument types. Once you plug into the amp, you select the iOnce you plug into the amp, you select the instrument type to the right (item 1). The ampnstrument type to the right (item 1). The amp
then changes its input sensitivity and gain structure to match your selection.then changes its input sensitivity and gain structure to match your selection.
NOtNOtE: VIp alifes e designed o E: VIp alifes e designed o e sed wih insens wih e sed wih insens wih ssive eleconics. When singssive eleconics. When sing
insens wih cive eleconics, he vole of he insens wih cive eleconics, he vole of he insen  need o insen  need o e edced o evene edced o even
cliing (nwned disoion).cliing (nwned disoion).
INStrumENt typE/prESEtSINStrumENt typE/prESEtS
With these buttons you select which type of instrument you are using with the amp. With these buttons you select which type of instrument you are using with the amp. There are 4 banks withThere are 4 banks with
4 presets each, for a total of 16 pr4 presets each, for a total of 16 presets. esets. The names of the preset banks are associated with The names of the preset banks are associated with the type ofthe type of
instrument being used. instrument being used. TTo access the o access the different different presets within the cpresets within the current bank, simply current bank, simply continue pressingontinue pressing
the button and the LED will change color to indicate whicthe button and the LED will change color to indicate which preset you have selected. h preset you have selected. Any changes youAny changes you
make to the settings (except for master volume level) can be saved back to the preset if desired. To savemake to the settings (except for master volume level) can be saved back to the preset if desired. To save
settings over the loaded preset, just press and hold its bank button until its LED begins to blink and thensettings over the loaded preset, just press and hold its bank button until its LED begins to blink and then
continue to hold the button until the LED stops blinking. Pressing the Tap Tempo button cancels the save.continue to hold the button until the LED stops blinking. Pressing the Tap Tempo button cancels the save.
To save changes to the current preset over a different preset, press and hold its bank button until its LEDTo save changes to the current preset over a different preset, press and hold its bank button until its LED
begins to blink. The LEDs for any other banks in which the preset can be saved will also blink. Select thebegins to blink. The LEDs for any other banks in which the preset can be saved will also blink. Select the
bank to save in by tapping the desired bank button - it will continue to blink but the other bank LEDs willbank to save in by tapping the desired bank button - it will continue to blink but the other bank LEDs will
turn off. If the bank LED is not the color of the desired preset to overwrite, tap the bank LED again until theturn off. If the bank LED is not the color of the desired preset to overwrite, tap the bank LED again until the
color matches the desired preset number. To complete the save, press and hold the bank button until thecolor matches the desired preset number. To complete the save, press and hold the bank button until the
LED stops blinking. LED stops blinking. Pressing the TPressing the Tap Tempo button cancels the ap Tempo button cancels the save.save.
NOtNOtE: When selecing ss o cosic eses (bnks C & D) E: When selecing ss o cosic eses (bnks C & D) he VIp 1 nd VIp2 will lii ccess o he VIp 1 nd VIp2 will lii ccess o onlonl
hose  odels ssocied wih he seleced insen nk. pessing nd holding ons b & Dhose  odels ssocied wih he seleced insen nk. pessing nd holding ons b & D
ding owe on will oen  ll  odels o ding owe on will oen  ll  odels o n ese.n ese.
INStrumENt/StOmpbOx ENCODErINStrumENt/StOmpbOx ENCODEr
TTurn this knob to select your desired pre-amplifier effect (if any). urn this knob to select your desired pre-amplifier effect (if any). Just think, 20 pedals you’ll never haveJust think, 20 pedals you’ll never have
to buy! to buy! In addition, there are 2 instrument models to choose from, In addition, there are 2 instrument models to choose from, an acoustic simulation and a bassan acoustic simulation and a bass
simulation! simulation! Press the Press the encoder momentarily to enter encoder momentarily to enter Edit mode (Item Edit mode (Item 11). 11). You’You’ll also notice ll also notice a small ‘m’ a small ‘m’ on aon a
few effects and the few effects and the bass simulation. bass simulation. This is because This is because these arethese are
onohonic effecsonohonic effecs
and as such, you’ll needand as such, you’ll need
to be careful toto be careful to l one noe   iel one noe   iefor them to work properly. for them to work properly. The LEDs on this encoder are bi-color.The LEDs on this encoder are bi-color.
At the bottom of the encoder is a guide to show which color represents which effect.At the bottom of the encoder is a guide to show which color represents which effect.
VIVIp p 1 F1 Foon n ppnenell
00
11
22
1 1 2 2 33
1010
00
Phs/FlgPhs/Flg
Env/WahEnv/Wah
Slp/SynSlp/Syn
Cmp/ChrsCmp/Chrs
BYPASSBYPASS
electric 1electric 1
EcousEcous
PeaveyPeavey
XXXXXX
BuddaBudda
TraceTrace
ClassicClassic
65056505
65346534
TraceTrace
TwnTwn
AA
BB
CC
DD
instrument typeinstrument type
guitarguitar
inputinput
iinnsstt//ssttoommpp aammpplliiffiieerrss
electric 2electric 2
AcoAcoustusticic
BassBass
acousticacoustic
bassbass
select type ofselect type of
inst. for inputinst. for input
push to editpush to edit
push for amp chnlpush for amp chnl
hold for tunerhold for tuner
looperlooper
BritishBritish
ButcherButcher
Acs/BssAcs/Bss
Trm/RotoTrm/Roto
Slice/UvbSlice/Uvb
Tsc/BstTsc/Bst
Rmod/VibRmod/Vib
oct/Pshfoct/Pshf
Rvs/MogRvs/Mog

m
m
mm
mm
mm
mm
Indicates Monophonic EffectIndicates Monophonic Effect
Play one note at a timePlay one note at a time
RED GRNRED GRN