Peavey XR 1000L

18
Effects Section
19
20
21
22
23
24
25
26
27
KOSMOS
®
C
The Kosmos -C module uses special circuitry
to enrich the sound of your system. The
low control is not just a simple bass boost.
It provides ‘natural bass enhancement’ by
adding harmonically related bass signals that
track envelope of the original signal. The
Kosmos-C, High control can be used to add
clarity to dull signals.
MASTER MUTE LED
When the LED is ON it indicates the master
mute is activated.
MASTER MUTE
Depressing this button mutes channels one
through seven, preventing signal from pass-
ing to the power amplier. This button does
not aect channel 8.
EFFECTS TYPE TABLE
This table lists the type of eects available
and the abbreviation used for that eect in
the rst character of the LED display. The
chart also lists the parameter associated with
the eect that is controlled by turning en-
coder 24. A more detailed list of eects can
be found at the end of this manual.
EFX LED
This LED indicates the type of eect currently
selected. When turning encoder 27 the dis-
play will ash until the encoder is depressed,
selecting a new eect.
PARAMETER CONTROL
This encoder controls the parameter associ-
ated with the selected eect, listed both on
the mixer (23) and in this manual. The param-
eter control is used to make adjustments to
the sound of the eect.
CLIP LED
This LED blinks RED when the signal to the eects section is too hot and is causing distortion. Find the
source of the hot signal by reducing the EFX SEND (5) on each channel until the LED is no longer clipping
(blinking red).
EFX MUTE
When pushed this button bypasses the eects section, letting the user listen to the dry signal. When de-
pressed and muted, LED 23 displays two dashes “--”.
EFFECTS SELECT
Turn and push this encoder to select the desired eect.
22
20
19
21
23
24
25 26
27
22