POWER SECTION
(400 SC Module with DDT
™
)
Power and Load:
210 W RMS per channel into 4 ohms
150 W RMS per channel into 8 ohms
420 W RMS Bridge into 8 ohms
Frequency Response:
20 Hz—20 kHz +0 dB/-1 dB
Total Harmonic Distortion:
<0.02% at rated output @ 1 kHz
DDT
™
Dynamic Range:
Greater than 26 dB
DDT
™
Maximum Distortion:
Below 0.5% THD for 6 dB overload
Below 1% THD for 20 dB overload
Hum and Noise:
-100 dB below 210 watts
Damping Factor:
Greater than 100 @ 1 kHz, 4 ohms
Input Impedance:
2 k ohms
Power Requirements:
Dom.: 120 V AC 60 Hz 360 W Nom.
Exp.: 220-230 V AC 50/60 Hz 360 W Nom.
Dimensions (H x W x D):
7.75" x 17.375" x 15.5"
(19.69 cm x 44.13 cm x 3.81 cm)
Weight:
33.6 lbs. (15.24 kg)
17
To Next Page
Loading...
